Description

Carbon Boom Back end – Fits many alu booms with 2 pins locking system.

Revitalise an aluminium boom, a carbon back end will make any boom much stiffer.

Here are dimensions to use to check existing tail before purchasing;

Please check your current tail against the following dimensions;

• Overall extension length = 60cm
• Distance between holes, centre to centre = 20mm
• Tube diameter = 25mm
• Total length from inside back end to end of side = 92cm, from 0cm (amount that goes inside boom arm) = 80cm – equates to 60cm + 20cm additional tube without holes for use at maximum.
• Total width measured outside of tube at extension setting;
• 0 = 18.5cm
• 30 = 26.5cm
• 60 – 34.8cm
• Maximum at end = 39.5cm (flexes to <36cm>)

Note: measurements are accurate as possible using a tape measure